ChoixPC + LDLC = cadeau    /    Les sponsors : rôles et fonctionnements

[S'inscrire]  [Aide (FAQ)]  [Rechercher]
[Connexion]  [Posts récents]  [Messages privés]
[Votre profil]  [Vos préférences]  [Sujets déplacés]
[Liste des membres]  [Stats]  [Accueil Site]  [Générateur]
[Accueil Forum] - Datation serveur (UTC+2) : 03:01
Forum ChoixPC » » Matériel PC : dépannage » » Problème wifi: hardware ou software ? comment diagnostiquer ?
Rechercher dans ce topic :
Mot clé :       Auteur :
Auteur Sujet : Problème wifi: hardware ou software ? comment diagnostiquer ?
pandroid
''Décrypteur de manuels informatiques''


Inscrit: Dec 15, 2006
Messages: 177
Posté le: 11-04-2019 à 23:40  | N° d'ordre sur la page en cours : 1 / 4 | N° d'ordre sur le topic : 1 / 4
Bonjour à tous,


Heureux possesseur d'un PC portable ASUS UX305FA depuis environ 5 ans, je rencontre depuis une dizaine de jours un souci avec mon Wifi... J'ai fait plusieurs recherches, mais cela n'a pas vraiment abouti malheureusement

En bref, en pleine utilisation mon ordinateur perd (souvent) la connexion wifi, et lorsque je tente de me reconnecter aucun réseau n'apparaît! La seule solution, à ce jour, semble être de redémarrer ou de connecter mon smartphone en Wifi, puis de faire un partage de connexion... Pas très pratique.

Dans un premier temps, j'ai voulu tester ma machine avec la suite "Phoronix" (je suis sur Ubuntu 18.10)... Mais le rapport ne semblait pas très parlant. J'ai ensuite fouillé sur le net, et alors la piste de Docker (outil que j'ai installé peu avant le début de mes problèmes) s'est ouverte... Mais malgré les réponses trouvées sur la toile, aucune ne semble résoudre mon souci.

Au final, je suis donc un peu coincé... Peut-être s'agit-il d'un souci logiciel (mise à jour, installation de Docker...), mais peut-être aussi d'un souci matériel (l'ordi ayant un peu d'ancienneté) ? A défaut de pouvoir diagnostiquer cela tout seul, je me tourne donc vers vous, des fois que quelqu'un pourrait m'aiguiller un peu... Merci d'avance !

Pour info, la commande ifconfig me retourne :
Quote:

e40; ~ ifconfig
br-4da56d8aac30: flags=4163 mtu 1500
inet 172.23.0.1 netmask 255.255.0.0 broadcast 172.23.255.255
inet6 fe80::42:3ff:fe8a:efaf prefixlen 64 scopeid 0x20<link>
ether 02:42:03:8a:ef:af txqueuelen 0 (Ethernet)
RX packets 256 bytes 355814 (355.8 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 378 bytes 26054 (26.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

docker0: flags=4099 mtu 1500
inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255
inet6 fe80::42:65ff:fec8:4ac7 prefixlen 64 scopeid 0x20<link>
ether 02:42:65:c8:4a:c7 txqueuelen 0 (Ethernet)
RX packets 95116 bytes 6144896 (6.1 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 111539 bytes 899358701 (899.3 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73 mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Boucle locale)
RX packets 5927 bytes 1447110 (1.4 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5927 bytes 1447110 (1.4 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

veth2e856ec: flags=4163 mtu 1500
inet6 fe80::14a1:a2ff:fef7:8d03 prefixlen 64 scopeid 0x20<link>
ether 16:a1:a2:f7:8d:03 txqueuelen 0 (Ethernet)
RX packets 260 bytes 355063 (355.0 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 435 bytes 31156 (31.1 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

vethb3d3b6c: flags=4163 mtu 1500
inet6 fe80::9056:52ff:fe90:a711 prefixlen 64 scopeid 0x20<link>
ether 92:56:52:90:a7:11 txqueuelen 0 (Ethernet)
RX packets 673 bytes 165326 (165.3 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 924 bytes 173041 (173.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

vethe9f7e54: flags=4163 mtu 1500
inet6 fe80::48ca:d7ff:fea5:6868 prefixlen 64 scopeid 0x20<link>
ether 4a:ca:d7:a5:68:68 txqueuelen 0 (Ethernet)
RX packets 123 bytes 354811 (354.8 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 273 bytes 370050 (370.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlp2s0: flags=4163 mtu 1500
inet 192.168.0.18 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::294f:7102:a9d4:730 prefixlen 64 scopeid 0x20<link>
ether 60:57:18:3a:2d:70 txqueuelen 1000 (Ethernet)
RX packets 761731 bytes 1052608879 (1.0 GB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 145447 bytes 17318911 (17.3 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0


_________________


                           --> Fct Warning : lire la FAQ svp.
alchemist
''Exorciseur de PC''


Inscrit: Mar 27, 2006
Messages: 2083
De: Hal (Belgique)
Posté le: 12-04-2019 à 08:40  | N° d'ordre sur la page en cours : 2 / 4 | N° d'ordre sur le topic : 2 / 4
Quelle distribution de Linux utilises-tu ? quelle version ?

quel est ce périphérique ? (lspci)
et que donne dmesg concernant ton périphérique ? Est-ce la bonne version de firmware qui est chargée ?


_________________
A+,
Xavier.


                              --> Fct Warning : lire la FAQ svp.
pandroid
''Décrypteur de manuels informatiques''


Inscrit: Dec 15, 2006
Messages: 177
Posté le: 12-04-2019 à 13:59  | N° d'ordre sur la page en cours : 3 / 4 | N° d'ordre sur le topic : 3 / 4
Bonjour, et merci pour la réponse!


Comme je le disais en présentation, j'utilise Ubuntu 18.10.

lspci retourne:
Quote:
lspci
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 08)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5300 (rev 08)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 08)
00:04.0 Signal processing controller: Intel Corporation Broadwell-U Processor Thermal Subsystem (rev 08)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03)
02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)



dmesg retourne:
Quote:

[ 0.000000] microcode: microcode updated early to revision 0x2b, date = 2018-03-22
[ 0.000000] Linux version 4.18.0-17-generic (buildd@lcy01-amd64-022) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #18-Ubuntu SMP Wed Mar 13 14:34:40 UTC 2019 (Ubuntu 4.18.0-17.18-generic 4.18.20)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-17-generic root=UUID=57401cf9-1fc0-4b9b-9bd3-46b6e111c5d2 ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b670efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b670f000-0x00000000b6a71fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b6a72000-0x00000000bca56fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bca57000-0x00000000bcab5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bcab6000-0x00000000bd2d5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd2d6000-0x00000000be413fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be414000-0x00000000beffdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000beffe000-0x00000000beffefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xb5507018-0xb5517057] usable ==> usable
[ 0.000000] e820: update [mem 0xb5507018-0xb5517057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b5507017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b5507018-0x00000000b5517057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b5517058-0x00000000b670efff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b670f000-0x00000000b6a71fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000b6a72000-0x00000000bca56fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bca57000-0x00000000bcab5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bcab6000-0x00000000bd2d5fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bd2d6000-0x00000000be413fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000be414000-0x00000000beffdfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000beffe000-0x00000000beffefff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bf800000-0x00000000dfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0xbd71c000 ACPI 2.0=0xbd71c000 SMBIOS=0xbee2c998 TPMEventLog=0xb5518018
[ 0.000000] secureboot: Secure boot enabled
[ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX305FA/UX305FA, BIOS UX305FA.206 12/16/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00B0000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 00B8000000 mask 7FFC000000 write-back
[ 0.000000] 5 base 00BC000000 mask 7FFE000000 write-back
[ 0.000000] 6 base 00BE000000 mask 7FFF000000 write-back
[ 0.000000] 7 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 8 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 9 base 021F000000 mask 7FFF000000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 7648M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xbefff max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1fb60000, 0x1fb60fff] PGTABLE
[ 0.000000] BRK [0x1fb61000, 0x1fb61fff] PGTABLE
[ 0.000000] BRK [0x1fb62000, 0x1fb62fff] PGTABLE
[ 0.000000] BRK [0x1fb63000, 0x1fb63fff] PGTABLE
[ 0.000000] BRK [0x1fb64000, 0x1fb64fff] PGTABLE
[ 0.000000] BRK [0x1fb65000, 0x1fb65fff] PGTABLE
[ 0.000000] BRK [0x1fb66000, 0x1fb66fff] PGTABLE
[ 0.000000] BRK [0x1fb67000, 0x1fb67fff] PGTABLE
[ 0.000000] BRK [0x1fb68000, 0x1fb68fff] PGTABLE
[ 0.000000] BRK [0x1fb69000, 0x1fb69fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3da2c000-0x3fffdfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BD71C000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000BD71C0B0 0000DC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BD735678 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BD71C218 019459 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000BE411F80 000040
[ 0.000000] ACPI: APIC 0x00000000BD735788 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BD735810 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000BD735858 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000BD7358F8 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 0x00000000BD7359C0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BD735A00 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BD735A38 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000BD735D50 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BD735D98 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000BD736A18 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000BD736AB8 000410 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000BD736EC8 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: TPM2 0x00000000BD737A40 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BD737A78 000041 (v01 Ssdt PttSsdt 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000BD737AC0 003245 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000BD73AD08 000394 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: PCCT 0x00000000BD73B0A0 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000BD73B110 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000BD73BBD8 00667D (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000BD742258 0000A8 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x00000000BD742300 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: MSDM 0x00000000BCAB4E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21efd3000-0x21effdfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b670efff]
[ 0.000000] node 0: [mem 0x00000000b6a72000-0x00000000bca56fff]
[ 0.000000] node 0: [mem 0x00000000bcab6000-0x00000000bd2d5fff]
[ 0.000000] node 0: [mem 0x00000000beffe000-0x00000000beffefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Reserved but unavailable: 12623 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.000000] On node 0 totalpages: 1949361
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12029 pages used for memmap
[ 0.000000] DMA32 zone: 769813 pages, LIFO batch:31
[ 0.000000] Normal zone: 18368 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0xc0000000-0xdfffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high res lint[0xff])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] res dfl lint[0x8e])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] low edge lint[0xff])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x31])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb5507000-0xb5507fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb5517000-0xb5517fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb670f000-0xb6a71fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbca57000-0xbcab5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd2d6000-0xbe413fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe414000-0xbeffdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbefff000-0xbf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1918879
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-17-generic root=UUID=57401cf9-1fc0-4b9b-9bd3-46b6e111c5d2 ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7430584K/7797444K available (12300K kernel code, 2633K rwdata, 4352K rodata, 2456K init, 2336K bss, 366860K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 40835 entries in 160 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] DMAR: Host address width 39
[ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.000000] DMAR: RMRR base: 0x000000bee3d000 end: 0x000000bee4bfff
[ 0.000000] DMAR: RMRR base: 0x000000bf800000 end: 0x000000dfffffff
[ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 997.676 MHz processor
[ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cc3074ea64, max_idle_ns: 881590487036 ns
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 1995.35 BogoMIPS (lpj=3990704)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.028019] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028701] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.028735] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028756] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028987] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028988] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028993] mce: CPU supports 7 MCE banks
[ 0.029003] CPU0: Thermal monitoring enabled (TM1)
[ 0.029015] process: using mwait in idle threads
[ 0.029018] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.029019] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.029021] Spectre V2 : Mitigation: Full generic retpoline
[ 0.029022] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.029022] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.029023] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.029023] Spectre V2 : Spectre v2 cross-process SMT mitigation: Enabling STIBP
[ 0.029025] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.029124] Freeing SMP alternatives memory: 36K
[ 0.034372] TSC deadline timer enabled
[ 0.034374] smpboot: CPU0: Intel(R) Processor 5Y10 CPU @ 0.80GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.034476] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.034527] ... version: 3
[ 0.034528] ... bit width: 48
[ 0.034529] ... generic registers: 4
[ 0.034530] ... value mask: 0000ffffffffffff
[ 0.034530] ... max period: 00007fffffffffff
[ 0.034531] ... fixed-purpose events: 3
[ 0.034531] ... event mask: 000000070000000f
[ 0.034568] Hierarchical SRCU implementation.
[ 0.035637] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.035653] smp: Bringing up secondary CPUs ...
[ 0.035738] x86: Booting SMP configuration:
[ 0.035740] .... node #0, CPUs: #1 #2 #3
[ 0.036595] smp: Brought up 1 node, 4 CPUs
[ 0.036595] smpboot: Max logical packages: 1
[ 0.036595] smpboot: Total of 4 processors activated (7981.40 BogoMIPS)
[ 0.040269] devtmpfs: initialized
[ 0.040269] x86/mm: Memory block size: 128MB
[ 0.040770] PM: Registering ACPI NVS region [mem 0xbd2d6000-0xbe413fff] (18079744 bytes)
[ 0.040770] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.040770] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.040770] pinctrl core: initialized pinctrl subsystem
[ 0.040770] RTC time: 19:37:15, date: 04/11/19
[ 0.040770] NET: Registered protocol family 16
[ 0.040770] audit: initializing netlink subsys (disabled)
[ 0.040770] audit: type=2000 audit(1555011435.040:1): state=initialized audit_enabled=0 res=1
[ 0.040770] cpuidle: using governor ladder
[ 0.040770] cpuidle: using governor menu
[ 0.040770] Detected 1 PCC Subspaces
[ 0.040770] Registering PCC driver as Mailbox controller
[ 0.040770] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.040770] ACPI: bus type PCI registered
[ 0.040770] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.040770] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.040770] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.040770] PCI: Using configuration type 1 for base access
[ 0.041405] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.041405] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.044090] ACPI: Added _OSI(Module Device)
[ 0.044091] ACPI: Added _OSI(Processor Device)
[ 0.044092] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.044092] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.044094] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.044095] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.044099] ACPI: EC: EC started
[ 0.044100] ACPI: EC: interrupt blocked
[ 0.044116] ACPI: \: Used as first EC
[ 0.044118] ACPI: \: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.044119] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.081969] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.098012] ACPI: Dynamic OEM Table Load:
[ 0.098012] ACPI: SSDT 0xFFFF9880150A8C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.098012] ACPI: Dynamic OEM Table Load:
[ 0.098012] ACPI: SSDT 0xFFFF9880156E8000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.100964] ACPI: Dynamic OEM Table Load:
[ 0.100964] ACPI: SSDT 0xFFFF9880151A3C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.105407] ACPI: Interpreter enabled
[ 0.105445] ACPI: (supports S0 S3 S4 S5)
[ 0.105446] ACPI: Using IOAPIC for interrupt routing
[ 0.105493] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.106645] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.111219] ACPI: Power Resource [PG00] (on)
[ 0.111459] ACPI: Power Resource [PG01] (on)
[ 0.112604] ACPI: Power Resource [PG02] (on)
[ 0.129074] ACPI: Power Resource [FN00] (off)
[ 0.129191] ACPI: Power Resource [FN01] (off)
[ 0.129305] ACPI: Power Resource [FN02] (off)
[ 0.129417] ACPI: Power Resource [FN03] (off)
[ 0.129528] ACPI: Power Resource [FN04] (off)
[ 0.131095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.131103] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.132951] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.132953] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.133944] PCI host bridge to bus 0000:00
[ 0.133947] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.133949] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.133951] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.133952] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.133964] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.133966] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.133968] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.133969] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.133971] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.133972] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.133974] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.133975] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.133977] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.133987] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.134138] pci 0000:00:02.0: [8086:161e] type 00 class 0x030000
[ 0.134151] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.134159] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.134164] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.134180] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.134329] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.134341] pci 0000:00:03.0: reg 0x10: [mem 0xf711c000-0xf711ffff 64bit]
[ 0.134494] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[ 0.134508] pci 0000:00:04.0: reg 0x10: [mem 0xf7110000-0xf7117fff 64bit]
[ 0.134679] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.134699] pci 0000:00:14.0: reg 0x10: [mem 0xf7100000-0xf710ffff 64bit]
[ 0.134761] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.134886] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.134906] pci 0000:00:16.0: reg 0x10: [mem 0xf7124000-0xf712401f 64bit]
[ 0.134971] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.135125] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.135146] pci 0000:00:1b.0: reg 0x10: [mem 0xf7118000-0xf711bfff 64bit]
[ 0.135209] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.135437] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.135524] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.135803] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.135894] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.136130] pci 0000:00:1f.0: [8086:9cc7] type 00 class 0x060100
[ 0.136387] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.136404] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.136411] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.136419] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.136428] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.136435] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.136443] pci 0000:00:1f.2: reg 0x24: [mem 0xf7122000-0xf71227ff]
[ 0.136484] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.136615] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.136635] pci 0000:00:1f.3: reg 0x10: [mem 0xf7121000-0xf71210ff 64bit]
[ 0.136655] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.136813] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[ 0.136848] pci 0000:00:1f.6: reg 0x10: [mem 0xf7120000-0xf7120fff 64bit]
[ 0.137319] acpiphp: Slot [1] registered
[ 0.137331] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.137817] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.137924] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
[ 0.138844] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.139704] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.139710] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.144275] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.144367] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.144454] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.144541] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.144628] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.144714] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.144802] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.144888] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.146024] ACPI: EC: interrupt unblocked
[ 0.146035] ACPI: EC: event unblocked
[ 0.146042] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.146044] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.146322] SCSI subsystem initialized
[ 0.146335] libata version 3.00 loaded.
[ 0.146335] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.146335] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.146335] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.146335] vgaarb: loaded
[ 0.146335] ACPI: bus type USB registered
[ 0.146335] usbcore: registered new interface driver usbfs
[ 0.146335] usbcore: registered new interface driver hub
[ 0.146335] usbcore: registered new device driver usb
[ 0.146335] pps_core: LinuxPPS API ver. 1 registered
[ 0.146335] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.146335] PTP clock support registered
[ 0.146335] EDAC MC: Ver: 3.0.0
[ 0.148075] Registered efivars operations
[ 0.150195] PCI: Using ACPI for IRQ routing
[ 0.150195] PCI: pci_cache_line_size set to 64 bytes
[ 0.152431] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.152433] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.152434] e820: reserve RAM buffer [mem 0xb5507018-0xb7ffffff]
[ 0.152436] e820: reserve RAM buffer [mem 0xb670f000-0xb7ffffff]
[ 0.152438] e820: reserve RAM buffer [mem 0xbca57000-0xbfffffff]
[ 0.152440] e820: reserve RAM buffer [mem 0xbd2d6000-0xbfffffff]
[ 0.152442] e820: reserve RAM buffer [mem 0xbefff000-0xbfffffff]
[ 0.152444] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.152601] NetLabel: Initializing
[ 0.152602] NetLabel: domain hash size = 128
[ 0.152603] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.152624] NetLabel: unlabeled traffic allowed by default
[ 0.152649] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.152649] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.154510] clocksource: Switched to clocksource tsc-early
[ 0.164386] VFS: Disk quotas dquot_6.6.0
[ 0.164405] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.164527] AppArmor: AppArmor Filesystem Enabled
[ 0.164561] pnp: PnP ACPI init
[ 0.164846] system 00:00: [io 0x0240-0x0259] has been reserved
[ 0.164852] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.164975] pnp 00:01: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.165030] pnp 00:02: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.165164] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.165166] system 00:03: [io 0xffff] has been reserved
[ 0.165168] system 00:03: [io 0xffff] has been reserved
[ 0.165169] system 00:03: [io 0xffff] has been reserved
[ 0.165171] system 00:03: [io 0x1800-0x18fe] has been reserved
[ 0.165173] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.165178] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.165240] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.165289] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.165293] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.165536] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.165538] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.165539] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.165541] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.165543] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.165545] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.165547] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.165549] system 00:06: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.165552] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.165554] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.165556] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.165558] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.165562] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166347] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.167376] pnp: PnP ACPI: found 8 devices
[ 0.173238] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.173339] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.173352] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.173357] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.173367] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.173368] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.173370] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.173372] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.173373] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.173375] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.173377] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.173378] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.173380] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.173382] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.173383] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.173385] pci_bus 0000:00: resource 15 [mem 0xe0000000-0xfeafffff window]
[ 0.173387] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.173596] NET: Registered protocol family 2
[ 0.173781] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.173811] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.173919] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.174046] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.174082] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.174106] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.174163] NET: Registered protocol family 1
[ 0.174169] NET: Registered protocol family 44
[ 0.174179] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.174689] PCI: CLS 64 bytes, default 64
[ 0.174726] Unpacking initramfs...
[ 0.814343] Freeing initrd memory: 38728K
[ 0.828045] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.828052] software IO TLB [mem 0xb1507000-0xb5507000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[ 0.828535] Scanning for low memory corruption every 60 seconds
[ 0.830117] Initialise system trusted keyrings
[ 0.830134] Key type blacklist registered
[ 0.830184] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.832379] zbud: loaded
[ 0.832916] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.833103] fuse init (API version 7.27)
[ 0.833160] pstore: using deflate compression
[ 0.834240] Key type asymmetric registered
[ 0.834241] Asymmetric key parser 'x509' registered
[ 0.834268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.834294] io scheduler noop registered
[ 0.834295] io scheduler deadline registered
[ 0.834322] io scheduler cfq registered (default)
[ 0.835338] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
[ 0.835363] pcieport 0000:00:1c.3: Signaling PME with IRQ 43
[ 0.835391] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.835451] efifb: probing for efifb
[ 0.835463] efifb: framebuffer at 0xe0000000, using 8100k, total 8100k
[ 0.835464] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.835465] efifb: scrolling: redraw
[ 0.835467] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.835564] Console: switching to colour frame buffer device 240x67
[ 0.835595] fb0: EFI VGA frame buffer device
[ 0.835605] intel_idle: MWAIT substates: 0x11142120
[ 0.835606] intel_idle: v0.4.1 model 0x3D
[ 0.835838] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.836065] ACPI: AC Adapter [AC0] (on-line)
[ 0.836161] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.836168] ACPI: Lid Switch [LID]
[ 0.836201] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.836214] ACPI: Sleep Button [SLPB]
[ 0.836250] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.836256] ACPI: Power Button [PWRF]
[ 0.838312] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.838313] ACPI: Thermal Zone [THRM] (59 C)
[ 0.839055] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.839056] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.839429] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.839430] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.839648] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.842275] Linux agpgart interface v0.103
[ 0.848821] ACPI: Battery Slot [BAT0] (battery present)
[ 0.865207] loop: module loaded
[ 0.865664] libphy: Fixed MDIO Bus: probed
[ 0.865667] tun: Universal TUN/TAP device driver, 1.6
[ 0.865794] PPP generic driver version 2.4.2
[ 0.865898] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.865904] ehci-pci: EHCI PCI platform driver
[ 0.865929] ehci-platform: EHCI generic platform driver
[ 0.865958] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.865961] ohci-pci: OHCI PCI platform driver
[ 0.865980] ohci-platform: OHCI generic platform driver
[ 0.866003] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.866436] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.866448] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.867522] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 0.867531] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.867781] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.867784] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.867787] usb usb1: Product: xHCI Host Controller
[ 0.867790] usb usb1: Manufacturer: Linux 4.18.0-17-generic xhci-hcd
[ 0.867793] usb usb1: SerialNumber: 0000:00:14.0
[ 0.867982] hub 1-0:1.0: USB hub found
[ 0.868001] hub 1-0:1.0: 11 ports detected
[ 0.873649] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.873652] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.873656] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.873691] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 0.873693] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.873695] usb usb2: Product: xHCI Host Controller
[ 0.873696] usb usb2: Manufacturer: Linux 4.18.0-17-generic xhci-hcd
[ 0.873698] usb usb2: SerialNumber: 0000:00:14.0
[ 0.873817] hub 2-0:1.0: USB hub found
[ 0.873826] hub 2-0:1.0: 4 ports detected
[ 0.875704] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.879637] i8042: Detected active multiplexing controller, rev 1.1
[ 0.881063] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.881067] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.881094] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.881115] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.881134] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.881255] mousedev: PS/2 mouse device common for all mice
[ 0.881485] rtc_cmos 00:04: RTC can wake from S4
[ 0.881635] rtc_cmos 00:04: registered as rtc0
[ 0.881651] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.881657] i2c /dev entries driver
[ 0.881662] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 0.881736] device-mapper: uevent: version 1.0.3
[ 0.881795] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 0.881802] intel_pstate: Intel P-state driver initializing
[ 0.881962] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.881965] EFI Variables Facility v0.08 2004-May-17
[ 0.884471] NET: Registered protocol family 10
[ 0.889352] Segment Routing with IPv6
[ 0.889378] NET: Registered protocol family 17
[ 0.889418] Key type dns_resolver registered
[ 0.889709] RAS: Correctable Errors collector initialized.
[ 0.889750] microcode: sig=0x306d4, pf=0x80, revision=0x2b
[ 0.889796] microcode: Microcode Update Driver: v2.2.
[ 0.889809] sched_clock: Marking stable (889791467, 0)->(872155577, 17635890)
[ 0.890016] registered taskstats version 1
[ 0.890028] Loading compiled-in X.509 certificates
[ 0.893314] Loaded X.509 cert 'Build time autogenerated kernel key: 841fb869c4d2d74e625344f26cce5b8d306cbbd0'
[ 0.896139] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring
[ 0.896395] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring
[ 0.896423] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 0.896448] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 0.896701] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 0.897225] zswap: loaded using pool lzo/zbud
[ 0.901922] Key type big_key registered
[ 0.901927] Key type trusted registered
[ 0.904337] Key type encrypted registered
[ 0.904341] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.908043] ima: Allocated hash algorithm: sha1
[ 0.921284] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.944149] evm: Initialising EVM extended attributes:
[ 0.944153] evm: security.selinux
[ 0.944154] evm: security.SMACK64
[ 0.944156] evm: security.SMACK64EXEC
[ 0.944157] evm: security.SMACK64TRANSMUTE
[ 0.944159] evm: security.SMACK64MMAP
[ 0.944160] evm: security.apparmor
[ 0.944161] evm: security.ima
[ 0.944163] evm: security.capability
[ 0.944165] evm: HMAC attrs: 0x1
[ 0.945386] Magic number: 15:410:647
[ 0.945447] acpi LNXCPU:00: hash matches
[ 0.945512] rtc_cmos 00:04: setting system clock to 2019-04-11 19:37:16 UTC (1555011436)
[ 0.945721] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7
[ 0.948203] Freeing unused kernel image memory: 2456K
[ 0.968110] Write protecting the kernel read-only data: 20480k
[ 0.969426] Freeing unused kernel image memory: 2008K
[ 0.969959] Freeing unused kernel image memory: 1792K
[ 0.983319] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.983319] x86/mm: Checking user space page tables
[ 0.996181] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.152019] ahci 0000:00:1f.2: version 3.0
[ 1.162413] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[ 1.162419] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.166555] scsi host0: ahci
[ 1.166971] scsi host1: ahci
[ 1.167066] ata1: SATA max UDMA/133 abar m2048@0xf7122000 port 0xf7122100 irq 45
[ 1.167067] ata2: DUMMY
[ 1.212083] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.369124] usb 1-3: New USB device found, idVendor=2e04, idProduct=c025, bcdDevice= 4.04
[ 1.369130] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.369134] usb 1-3: Product: Nokia 7 plus
[ 1.369138] usb 1-3: Manufacturer: HMD Global
[ 1.369142] usb 1-3: SerialNumber: B2NGAA8822813829
[ 1.483756] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.484594] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[ 1.485651] ata1.00: ATA-9: SanDisk SD7SN3Q128G1002, X2170002, max UDMA/133
[ 1.485657] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.486930] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[ 1.488355] ata1.00: configured for UDMA/133
[ 1.488991] scsi 0:0:0:0: Direct-Access ATA SanDisk SD7SN3Q1 0002 PQ: 0 ANSI: 5
[ 1.489761] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.490007] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.490034] sd 0:0:0:0: [sda] Write Protect is off
[ 1.490040] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.490083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.492120] sda: sda1 sda2 sda3
[ 1.493072] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.708112] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 1.765724] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x381f00)
[ 1.779832] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[ 1.793963] psmouse serio4: elantech: Elan sample query result 00, 23, 64
[ 1.796572] random: fast init done
[ 1.856086] tsc: Refined TSC clocksource calibration: 997.689 MHz
[ 1.856104] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc31ff2757, max_idle_ns: 881590465810 ns
[ 1.856656] clocksource: Switched to clocksource tsc
[ 1.858927] usb 1-4: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 1.858933] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.859344] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.859370] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.859425] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.861847] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
[ 1.988115] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 2.176102] usb 1-5: New USB device found, idVendor=064e, idProduct=9700, bcdDevice= 1.01
[ 2.176109] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.176114] usb 1-5: Product: USB2.0 UVC HD Webcam
[ 2.176118] usb 1-5: Manufacturer: SuYin
[ 2.176121] usb 1-5: SerialNumber: HF1019-T838-SN03-Rev0101
[ 2.187445] usb-storage 1-3:1.1: USB Mass Storage device detected
[ 2.187547] scsi host2: usb-storage 1-3:1.1
[ 2.187673] usbcore: registered new interface driver usb-storage
[ 2.189161] usbcore: registered new interface driver uas
[ 2.250497] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.420165] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.440550] systemd[1]: Detected architecture x86-64.
[ 2.444898] systemd[1]: Set hostname to .
[ 2.445353] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[ 2.514596] Lockdown: systemd: BPF is restricted; see man kernel_lockdown.7
[ 2.514606] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 2.514608] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 2.661229] systemd[1]: Listening on Journal Audit Socket.
[ 2.662181] systemd[1]: Listening on Syslog Socket.
[ 2.662292] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.662316] systemd[1]: Reached target User and Group Name Lookups.
[ 2.662464] systemd[1]: Listening on Journal Socket.
[ 2.735745] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 2.740626] lp: driver loaded but no devices found
[ 2.758225] RPC: Registered named UNIX socket transport module.
[ 2.758227] RPC: Registered udp transport module.
[ 2.758228] RPC: Registered tcp transport module.
[ 2.758228] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.778523] ppdev: user-space parallel port driver
[ 2.816710] systemd-journald[268]: Received request to flush runtime journal from PID 1
[ 2.846840] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.872349] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 3.202024] scsi 2:0:0:0: CD-ROM Linux File-CD Gadget 0404 PQ: 0 ANSI: 2
[ 3.204090] sr 2:0:0:0: Power-on or device reset occurred
[ 3.205013] sr 2:0:0:0: [sr0] scsi-1 drive
[ 3.205015] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.205547] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.206057] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.265149] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input12
[ 3.506591] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.507068] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.549848] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 3.549852] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.549854] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.549855] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.549856] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.584783] Intel(R) Wireless WiFi driver for Linux
[ 3.584784] Copyright(c) 2003- 2015 Intel Corporation
[ 3.608225] cryptd: max_cpu_qlen set to 1000
[ 3.608875] checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
[ 3.608878] fb: switching to inteldrmfb from EFI VGA
[ 3.608946] Console: switching to colour dummy device 80x25
[ 3.611551] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[ 3.613284] [drm] Replacing VGA console driver
[ 3.619887] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.619889] [drm] Driver supports precise vblank timestamp query.
[ 3.620633] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.646693] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[ 3.651412] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.674523] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 3.677130] fbcon: inteldrmfb (fb0) is primary device
[ 3.677277] Console: switching to colour frame buffer device 240x67
[ 3.677342] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.696651] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 3.708323] AVX2 version of gcm_enc/dec engaged.
[ 3.708324] AES CTR mode by8 optimization enabled
[ 3.721437] iwlwifi 0000:02:00.0: base HW address: 60:57:18:3a:2d:70
[ 3.838312] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 3.838645] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 3.838650] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.838654] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 3.838657] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
[ 3.838659] snd_hda_codec_conexant hdaudioC1D0: inputs:
[ 3.838663] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
[ 3.838666] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
[ 3.839475] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[ 3.843478] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.843639] PKCS#7 signature not signed with a trusted key
[ 3.843646] Lockdown: systemd-udevd: Loading of module with unavailable key is restricted; see man kernel_lockdown.7
[ 3.843941] thermal thermal_zone6: failed to read out thermal zone (-61)
[ 3.848659] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 3.848761] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 4.026479] intel_rapl: Found RAPL domain package
[ 4.026482] intel_rapl: Found RAPL domain core
[ 4.026484] intel_rapl: Found RAPL domain uncore
[ 4.026486] intel_rapl: Found RAPL domain dram
[ 4.026490] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 4.026499] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 4.145306] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 4.229457] random: crng init done
[ 4.229459] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.926352] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.947906] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 4.948028] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 4.948181] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 4.948280] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 4.948378] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 4.950404] media: Linux media interface: v0.10
[ 4.981408] Bluetooth: Core ver 2.22
[ 4.981433] NET: Registered protocol family 31
[ 4.981435] Bluetooth: HCI device and connection manager initialized
[ 4.981440] Bluetooth: HCI socket layer initialized
[ 4.981443] Bluetooth: L2CAP socket layer initialized
[ 4.981452] Bluetooth: SCO socket layer initialized
[ 5.133375] videodev: Linux video capture interface: v2.00
[ 5.163445] usbcore: registered new interface driver btusb
[ 5.182826] Bluetooth: hci0: read Intel version: 370810011003110e32
[ 5.182829] Bluetooth: hci0: Intel device is already patched. patch num: 32
[ 5.469983] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (064e:9700)
[ 5.483233] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 5.483354] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.483361] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.483601] input: USB2.0 UVC HD Webcam: USB2.0 UV as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input21
[ 5.483828] usbcore: registered new interface driver uvcvideo
[ 5.483830] USB Video Class driver (1.1.1)
[ 5.637412] audit: type=1400 audit(1555011441.187:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=828 comm="apparmor_parser"
[ 5.639003] audit: type=1400 audit(1555011441.187:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=827 comm="apparmor_parser"
[ 5.639010] audit: type=1400 audit(1555011441.187:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=827 comm="apparmor_parser"
[ 5.639014] audit: type=1400 audit(1555011441.187:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=827 comm="apparmor_parser"
[ 5.640371] audit: type=1400 audit(1555011441.191:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=829 comm="apparmor_parser"
[ 5.643117] audit: type=1400 audit(1555011441.191:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=824 comm="apparmor_parser"
[ 5.643120] audit: type=1400 audit(1555011441.191:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=824 comm="apparmor_parser"
[ 5.643122] audit: type=1400 audit(1555011441.191:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=824 comm="apparmor_parser"
[ 5.643124] audit: type=1400 audit(1555011441.191:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=824 comm="apparmor_parser"
[ 5.646682] audit: type=1400 audit(1555011441.195:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=831 comm="apparmor_parser"
[ 6.895584] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.895587] Bluetooth: BNEP filters: protocol multicast
[ 6.895592] Bluetooth: BNEP socket layer initialized
[ 7.779251] bpfilter: Loaded bpfilter_umh pid 1426
[ 7.826870] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 7.827368] NFSD: starting 90-second grace period (net f00000a8)
[ 8.395894] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 8.500659] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 8.821863] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 8.917567] aufs 4.18-20180910
[ 12.470370] wlp2s0: authenticate with f4:6b:ef:4f:23:de
[ 12.476144] wlp2s0: send auth to f4:6b:ef:4f:23:de (try 1/3)
[ 12.479104] wlp2s0: authenticated
[ 12.480068] wlp2s0: associate with f4:6b:ef:4f:23:de (try 1/3)
[ 12.484614] wlp2s0: RX AssocResp from f4:6b:ef:4f:23:de (capab=0x1411 status=0 aid=3)
[ 12.499171] wlp2s0: associated
[ 12.499237] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by f4:6b:ef:4f:23:de
[ 12.552091] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 17.101543] kauditd_printk_skb: 37 callbacks suppressed
[ 17.101545] audit: type=1400 audit(1555011452.651:49): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2799 comm="apparmor_parser"
[ 17.489152] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 17.491835] Bridge firewalling registered
[ 17.590856] Initializing XFRM netlink socket
[ 17.664623] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 17.741060] IPv6: ADDRCONF(NETDEV_UP): br-fb5b3b0b65e6: link is not ready
[ 28.998358] Bluetooth: RFCOMM TTY layer initialized
[ 28.998377] Bluetooth: RFCOMM socket layer initialized
[ 28.998384] Bluetooth: RFCOMM ver 1.11
[ 31.504147] rfkill: input handler disabled
[ 186.623740] wlp2s0: deauthenticating from f4:6b:ef:4f:23:de by local choice (Reason: 3=DEAUTH_LEAVING)
[ 186.937293] IPv6: ADDRCONF(NE


                           --> Fct Warning : lire la FAQ svp.
alchemist
''Exorciseur de PC''


Inscrit: Mar 27, 2006
Messages: 2083
De: Hal (Belgique)
Posté le: 12-04-2019 à 14:48  | N° d'ordre sur la page en cours : 4 / 4 | N° d'ordre sur le topic : 4 / 4
Il essaie de se connecter en IPv6 sans essayer IPv4, est-ce le scénario désiré ?
_________________
A+,
Xavier.


                              --> Fct Warning : lire la FAQ svp.
Forum ChoixPC » » Matériel PC : dépannage » » Problème wifi: hardware ou software ? comment diagnostiquer ? Haut de page | Posts récents